5G HUB, Support access to 8xRRU, M680
Short Description:
MoreLink’s M680 is a 5G Hub, which is an important part of 5G extended Base Station. It is connected to the extended host (BBU) through optical fiber, and connected to the extended coverage unit (RRU) through the radio and television composite cable / cable (supper class 5 cable or class 6 cable) to realize the extended coverage of 5G signal. At the same time, it also supports cascading next level expansion units to meet the coverage requirements of medium and large scenarios.
Product Detail
Product Tags
Product Overview
MoreLink’s M680 is a 5G Hub, which is an important part of 5G extended Base Station. It is connected to the extended host (BBU) through optical fiber, and connected to the extended coverage unit (RRU) through the radio and television composite cable / cable (supper class 5 cable or class 6 cable) to realize the extended coverage of 5G signal. At the same time, it also supports cascading next level expansion units to meet the coverage requirements of medium and large scenarios.
Features
➢ Support access to 8 coverage units (RRU)
➢ Support remote power supply through power supply module or PoE power supply to directly connected RRU through network port.
➢ Combination of uplink signals and the broadcast of downlink signals of each RRU system are realized.
➢ Complete network management functions such as software remote download and upgrade, remote monitoring, etc.
Typical Application
5G extended Pico Station can effectively expand the coverage and enhance the ability to deal with multi-partition and large area indoor scenes. It is mainly used in small and medium-sized indoor places such as enterprises, offices, business halls, Internet cafes, supermarkets, etc. to solve the problem of lo 5G signal coverage and achieve accurate and deep coverage.
Hardware
| Item | Description |
| Exchange Scheme | Mode-1: CPRI Mode-2: eCPRI Mode-3: eCPRI to CPRI |
| Interface Capability | 25G*10 Fiber Interfaces |
| Data Interfaces | Connect to RRU: 8x optical portsConnect to BBU: 1x optical port 1x optical port for cascade expansion unit |
| Dimension | 44.45mm*482.6mm*250mm |
| Weight | 5 kg |
| Installation | Wall/Floor/In Cabinet |
| Power Consumption | Static Power Consumption: 50W |
| Full Loading RRU: 700W | |
| Power Supply | Input: AC200V~240V 1PCS Power input |
| Output: DC54V 8PCS Power to the remote unit | |
| Cascade series | 2 stage cascades |
| Maximum Pulling Distance of Photoelectric Composite Cable | 200m |
| Photoelectric Composite Cable | Maximum 9.5mm |
Environmental
|
Item |
Description |
|
Operating Temperature |
-5°C ~ +45°C |
|
Humidity |
5% ~ 95% |
|
Noise |
60 dBA |
External Interface
|
I/O |
Description |
|
110~220 VAC;12A |
Power Supply Port, from 110V to 220V AC Power |
|
ETH |
RJ-45 Giga Ethernet for Debug |
|
DEBUG |
RS-232 for Debug |
|
OPT0 ~ OPT7 |
SFP+, to RRU |
|
OPT8 |
SFP+, to next stage HUB |
|
OPT9 |
SFP+, to BBU or the up-level HUB |
|
OPT10 |
Optical Port, Reserved |
|
OPT11 |
Optical Port, Reserved |
|
PWR0 ~ PWR7 |
Power Output Port (54V AC), to RRU |
Power LED
|
Indicator |
Status |
Definition |
|
Operating |
ON |
System is running normally |
|
Synchronization
|
Fast Blinking |
The Up or Down connection is not synchronized |
|
Slow Blinking |
Both Up and Down connections are synchronized |
|
|
OFF |
The Up and Down connections are not synchronized |
|
|
Alarm
|
ON |
There’s an alarm on the device |
|
OFF |
No alarm or alarm cleared |
