Cable CPE, Data Modem, DOCSIS 3.1, 4xGE, SP440
Short Description:
The MoreLink’s SP440 is a DOCSIS 3.1 Cable Modem supporting 2×2 OFDM and 32×8 SC-QAM to deliver a powerful high-speed Internet experience.
The SP440 is the perfect choice for cable operators who want to offer high-speed and economic broadband access to their customer base. It delivers speeds up to 4Gbps based on 4 Giga Ethernet ports over its DOCSIS interface. The SP440 allows MSOs to offer their customers various broadband applications such as telecommuting, HD, and UHD video on demand over IP connectivity to a small oce/home oce (SOHO), high-speed residential Internet access, interactive multimedia services, etc.
Product Detail
Product Tags
Product Detail
The MoreLink’s SP440 is a DOCSIS 3.1 Cable Modem supporting 2x2 OFDM and 32x8 SC-QAM to deliver a powerful high-speed Internet experience.
The SP440 is the perfect choice for cable operators who want to offer high-speed and economic broadband access to their customer base. It delivers speeds up to 4Gbps based on 4 Giga Ethernet ports over its DOCSIS interface. The SP440 allows MSOs to offer their customers various broadband applications such as telecommuting, HD, and UHD video on demand over IP connectivity to a small oce/home oce (SOHO), high-speed residential Internet access, interactive multimedia services, etc.
The SP440 is an intelligent device that enhances its basic data transmission features with IPv6 support, which makes it especially suitable for the transmission of data based on this protocol.
Product Features
➢ DOCSIS / EuroDOCSIS 3.1 compliant
➢ 2x192MHz OFDM downstream reception capability
-4096 QAM support
➢ 32x SC-QAM (Single-Carries QAM) channel downstream reception capability
-1024 QAM support
-16 of 32 channels capable of enhanced de-interleaving for video support
➢ 2x96 MHz OFDMA upstream transmission capability
-256 QAM support
-S-CDMA and A/TDMA support
➢ FBC (Full Band Capture) Front End
-1.2 GHz Bandwidth
-Configurable to receive and channel in the downstream spectrum
-Supports fast channel change
-Real-time, diagnostic including spectrum analyzer functionality
➢ Four Gigabit Ethernet Ports supporting auto-negotiation
➢ 1x USB3.0 Host, 1.5A limitation (Typ.) (Optional)
➢ Well-defined LEDs clearly display device and network status
➢ Software upgrade by HFC network
➢ SNMP V1/V2/V3
➢ Support baseline privacy encryption (BPI/BPI+)
➢ 2 Year Limited Warranty
Technical Parameters
|
Connectivity Interface |
|
| RF | 75 OHM Female F Connector |
| RJ45 | 4x RJ45 Ethernet port 10/100/1000 Mbps |
| USB | 1x USB 3.0 Host |
|
RF Downstream |
|
| Frequency (edge-to-edge) | 258-1218 MHz |
| Input Impedance | 75 OHM |
| Total Input Power | <40 dBmV |
| Input Return Loss | > 6 dB |
|
SC-QAM Channels |
|
| No. of Channels | 32 Max. |
| Level Range (one channel) |
North Am (64 QAM, 256 QAM): -15 to + 15 dBmV Euro (64 QAM): -17 to + 13 dBmV Euro (256 QAM): -13 to + 17dBmV |
| Modulation Type | 64 QAM, 256 QAM |
| Symbol Rate (nominal) |
North Am (64 QAM): 5.056941 Msym/s North Am (256 QAM): 5.360537 Msym/s Euro (64 QAM, 256 QAM): 6.952 Msym/s |
| Bandwidth |
North Am (64 QAM/256QAM with α=0.18/0.12): 6 MHz EURO (64 QAM/256QAM with α=0.15): 8 MHz |
|
OFDM Channels |
|
| Signal Type | OFDM |
| Maximum OFDM Channel Bandwidth | 192 MHz |
| Minimum Contiguous-Modulated OFDM Bandwidth | 24 MHz |
| No. of OFDM Channels | 2 |
| Frequency Boundary Assignment Granularity |
25 KHz 8K FFT 50 KHz 4K FFT |
| Subcarrier Spacing / FFT Duration |
25 KHz / 40 us 50 KHz / 20 us |
| Modulation Type | QPSK, 16-QAM, 64-QAM,128-QAM, 256-QAM, 512-QAM, 1024-QAM, 2048-QAM, 4096-QAM |
| Variable Bit Loading |
Support with subcarrier granularity Support zero bit loaded subcarriers |
| Level Range (24 MHz mini. Occupied BW) Equivalent Power Spectral Density to SC-QAM of -15 to + 15 dBmV per 6 MHz | -9 dBmV/24 MHz to 21 dBmV/24 MHz |
|
Upstream |
|
| Frequency Range (edge to edge) | 5-204 MHz |
| Output Impedance | 75 OHM |
| Maximum Transmit Level | (Total average power) +65 dBmV |
| Output Return Loss | >6 dB |
|
SC-QAM Channels |
|
| Signal Type | TDMA, S-CDMA |
| No. of Channels | 8 Max. |
| Modulation Type | QPSK, 8 QAM, 16 QAM, 32 QAM, 64 QAM, and 128 QAM |
| Modulation Rate (nominal) |
TDMA: 1280, 2560, and 5120 KHz S-CDMA: 1280, 2560, and 5120 KHz Pre-DOCSIS3 operation: TDMA: 160, 320, and 640 KHz |
| Bandwidth |
TDMA: 1600, 3200, and 6400 KHz S-CDMA: 1600, 3200, and 6400 KHz Pre-DOCSIS3 operation: TDMA: 200, 400, and 800 KHz |
| Minimum Transmit Level |
Pmin = +17 dBmV at ≤1280 KHz modulation rate Pmin = +20 dBmV at 2560 KHz modulation rate Pmin = +23 dBmV at 5120 KHz modulation rate |
|
OFDMA Channels |
|
| Signal Type | OFDMA |
| Maximum OFDMA Channel Bandwidth | 96 MHz |
|
Minimum OFDMA Occupied Bandwidth |
6.4 MHz (for 25 KHz subcarrier spacing) 10 MHz (for 50 KHz subcarriers spacing) |
| No. of Independently Configurable OFDMA Channels | 2 |
| Subcarrier Channel Spacing | 25, 50 KHz |
| FFT Size | 50 KHz: 2048 (2K FFT); 1900 Max. active subcarriers 25 KHz: 4096 (4K FFT); 3800 Max. active subcarriers |
| Sampling Rate | 102.4 (96 MHz Block Size) |
| FFT Time Duration |
40 us (25 KHz subcarriers) 20 us (50 KHz subcarriers) |
| Modulation Type | BPSK, QPSK, 8-QAM, 16-QAM, 32-QAM, 64-QAM,128-QAM, 256-QAM, 512-QAM, 1024-QAM, 2048-QAM, 4096-QAM |
|
Mechanical |
|
| LED | PWR/DS/US/ONLINE/Ethernet |
| Factory Reset Button | x1 |
| Dimensions | 160x68x195 mm |
| Weight | 510g |
| Environmental | |
| Power Input | 12V/1.5A |
| Power Consumption | <15W (Max.) |
| Operating Temperature | 0 to 40 oC |
| Operating Humidity | 10~90% (Non Condensing) |
| Storage Temperature | -40 to 85 oC |
| Surge Protection |
RF input sustains at least 6KV Ethernet RJ-45 sustains at least 1KV |
|
Accessories |
|
| 1 | 1x User Guide |
| 2 | 1x 1.5M Ethernet Cable |
| 3 | 4x Label (SN, MAC Address) |
| 4 | 1x Power Adapter. Input: 100-240VAC, 50/60Hz; Output: 12VDC/1.5A |
More Detail Pictures
