Cable CPE, Wireless Gateway, DOCSIS 3.0, 8×4, 4xGE, Dual Band Wi-Fi, SP143
Short Description:
The MoreLink’s SP143 is a DOCSIS 3.0 Cable Modem supporting up to 8 downstream and 4 upstream bonded channels to deliver a powerful high-speed Internet experience. The integrated IEEE802.11ac 2×2 Wi-Fi access point dual band significantly improves customer experience extending range and coverage with high speed.
The SP143 provides you advanced multimedia services with data rates up to 400 Mbps download and 108 Mbps upload depending on your Cable Internet provider service. That makes Internet applications far more realistic, faster, and efficient than ever before.
Product Detail
Product Tags
Product Detail
The MoreLink’s SP143 is a DOCSIS 3.0 Cable Modem supporting up to 8 downstream and 4 upstream bonded channels to deliver a powerful high-speed Internet experience. The integrated IEEE802.11ac 2×2 Wi-Fi access point dual band significantly improves customer experience extending range and coverage with high speed.
The SP143 provides you advanced multimedia services with data rates up to 400 Mbps download and 108 Mbps upload depending on your Cable Internet provider service. That makes Internet applications far more realistic, faster, and efficient than ever before.
Product Features
➢ DOCSIS / EuroDOCSIS 3.0 compliant
➢ 8 downstream x 4 upstream bonded channels
➢ Support Full Band Capture
➢ Four Gigabit Ethernet Ports supporting auto-negotiation
➢ IEEE802.11ac Wi-Fi Access Point with 2x2 dual band, internal antennas
➢ 8 SSIDs
➢ Individual configuration for each SSID (security, bridging, routing, firewall and Wi-Fi parameters)
➢ Software upgrade by HFC network
➢ Support up to 128 CPE devices connected
➢ SNMP V1/V2/V3 and TR069
➢ Support baseline privacy encryption (BPI/BPI+)
➢ 2 Year Limited Warranty
Technical Parameters
Protocol Support |
|
DOCSIS/EuroDOCSIS 1.1/2.0/3.0 SNMP V1/2/3 TR069 |
|
Connectivity |
|
RF | 75 OHM Female F Connector |
RJ45 | 4x RJ45 Ethernet port 10/100/1000 Mbps |
RF Downstream |
|
Frequency (edge-to-edge) | 88~1002 MHz (DOCSIS) 108~1002MHz (EuroDOCSIS) |
Channel Bandwidth | 6MHz (DOCSIS) 8MHz (EuroDOCSIS) 6/8MHz (Auto Detection, Hybrid Mode) |
Modulation | 64QAM, 256QAM |
Data Rate | Up to 400Mbps by 8 Channel bonding |
Signal Level | Docsis: -15 to +15dBmV Euro Docsis: -17 to +13dBmV (64QAM); -13 to +17dBmV (256QAM) |
RF Upstream
|
|
Frequency Range | 5~42MHz (DOCSIS) 5~65MHz (EuroDOCSIS) 5~85MHz (Optional) |
Modulation | TDMA: QPSK,8QAM,16QAM,32QAM,64QAM S-CDMA: QPSK,8QAM,16QAM,32QAM,64QAM,128QAM |
Data Rate | Up to 108Mbps by 4 Channel Bonding |
RF Output Level | TDMA (32/64 QAM): +17 ~ +57dBmV TDMA (8/16 QAM): +17 ~ +58dBmV TDMA (QPSK): +17 ~ +61dBmV S-CDMA: +17 ~ +56dBmV |
WiFi (11n+11ac Concurrent) |
|
2.4G 2x2: | |
Wireless Standard | IEEE 802.11 b/g/n |
Chipset | BCM43217TKMLG |
Frequency | 2.412 ~ 2.484GHz |
Data Rate | 300Mbps (Maximum) |
Encryption | WEP, WPA/WPA-PSK, WPA2/WPA2-PSK |
Max No. of SSID | 8 |
Transmission Power | >+15dBm @ 11n, 20M, MCS7 |
Receiving Sensitivity | ANT0/1: 11Mbps -86dBm@8%; 54Mbps -73dBm@10%; 130Mbps -69dBm@10% |
5G 2x2: |
|
Wireless Standard | IEEE 802.11ac/n/a, 802.3, 802.3u |
Chipset | BCM4352KMLG |
Frequency Band | 4.9~5.845 GHz ISM Band |
Data Rate | 867 Mbps (Maximum) |
Receiver Sensitivity | 11a(54Mbps) ≤ -72dBm@10%, 11n-20M(mcs7) ≤ -69 dBm@10% 11n-40M(mcs7) ≤ -67dBm@10% 11ac-20M(mcs7) ≤ -68dBm@10% 11ac-40M(mcs7) ≤ -64dBm@10% 11ac-80M(mcs7) ≤ -62dBm@10% |
TX power Level | 11a(54Mbps) 15±2 dBm 11n-20M(mcs7) 15±2 dBm 11n-40M(mcs7) 15±2 dBm 11ac-20M(mcs7) 15±2 dBm 11ac-40M(mcs7) 15±2 dBm 11ac-80M(mcs7) 14±2 dBm |
Spread Spectrum | IEEE802.11ac/n/a: OFDM (Orthogonal Frequency Division Multiplexing) |
Security | WEP, TKIP, AES, WPA, WPA2 |
Antenna (Common Freq.) | 1x 3dBi Internal Antenna + 1x 5dBi External Antenna |
Networking |
|
Network protocol | IP/TCP/UDP/ARP/ICMP/DHCP/TFTP/SNMP/HTTP/TR069/VPN (L2 and L3) |
Routing | DNS / DHCP server / RIP I and II |
Internet Sharing | NAT / NAPT / DHCP server / DNS |
SNMP version | SNMP v1/v2/v3 |
DHCP server | Built-in DHCP server to distribute IP address to CPE by CM’s Ethernet port |
DCHP client | CM automatically gets IP and DNS server address from MSO DHCP server |
Mechanical |
|
Status LED | x11 (PWR, DS, US, Online, LAN1~4, 2G, 5G, WPS) |
Factory Reset Button | x1 |
WPS Button | x1 |
Dimensions | 215mm (W) x 160mm (H) x 45mm (D) |
Environmental |
|
Power Input | 12V/1.5A |
Power Consumption | 18W (Max.) |
Operating Temperature | 0 to 40 oC |
Operating Humidity | 10~90% (Non Condensing) |
Storage Temperature | -40 to 85 oC |
Accessories |
|
1 | 1x User Guide |
2 | 1x 1.5M Ethernet Cable |
3 | 4x Label (SN, MAC Address) |
4 | 1x Power Adapter. Input: 100-240VAC, 50/60Hz; Output: 12VDC/1.5A |