Cable One Modem Factory – ECMM, Wireless Gateway, DOCSIS 3.0, 3xFE, SMB Loop Through, HS132E – MoreLink

Short Description:

Product Detail

Product Tags

Feedback (2)

We constantly think and practice corresponding to the change of circumstance, and grow up. We aim at the achievement of a richer mind and body along with the living for Handheld Spectrum Analyser, 51060eny, Wi-Fi 11n, Our Lab now is "National Lab of diesel engine turbo technology " , and we own a professional R&D team and complete testing facility.

Cable One Modem Factory – ECMM, Wireless Gateway, DOCSIS 3.0, 3xFE, SMB Loop Through, HS132E – MoreLink Detail:

Product Detail

The MoreLink’s HS132E is a DOCSIS 3.0 ECMM Module (Embedded Cable Modem Module) supporting up to 8 downstream and 4 upstream bonded channels to deliver a powerful high-speed Internet experience. The integrated IEEE802.11n 2×2 Wi-Fi access point significantly improves customer experience extending range and coverage with high speed.

The HS132E provides you advanced multimedia services with data rates up to 400 Mbps download and 108 Mbps upload depending on your Cable Internet provider service. That makes Internet applications far more realistic, faster, and efficient than ever before.

Product Features

➢ DOCSIS / EuroDOCSIS 3.0 compliant

➢ 8 downstream x 4 upstream bonded channels

➢ Support Full Band Capture

➢ One 10/100 Mbps Ethernet for RJ45

➢ Two 10/100 Mbps Ethernet Signals for STB

➢ RF Loop Through to STB by SMB

➢ Software upgrade by HFC network

➢ Support SNMP V1/V2/V3

➢ Support baseline privacy encryption (BPI/BPI+)

Application

➢ DVB-C or Hybrid STB embedded CM

Technical Parameters

Protocol Support
DOCSIS/EuroDOCSIS 1.1/2.0/3.0 SNMP V1/2/3 TR069
Connectivity
RF	75 OHM Female F Connector; One Loop Through by use of SMB connector
RJ45	One 10/100Mbps Base-TX Ethernet port (RJ45) with LEDs
Signal Interface 1	2.0mm 2×18 Pin Header; The signals including: Two 10/100Mbps Ethernet, USB, +12V and GND. Pin Definitions see Table-#1
Signal Interface 2	LEDs Signal to Front Panel
RF Downstream
Frequency (Edge to Edge)	88~1002 MHz (DOCSIS) 108~1002MHz (EuroDOCSIS)
Channel Bandwidth	6MHz (DOCSIS) 8MHz (EuroDOCSIS) 6/8MHz (Auto Detection, Hybrid Mode)
Modulation	64QAM, 256QAM
PHY Rate	Up to 400Mbps
Signal Level	Docsis: -15 to +15dBmV Euro Docsis: -17 to +13dBmV (64QAM); -13 to +17dBmV (256QAM)
RF Upstream
Frequency Range (Edge to Edge)	5~42MHz (DOCSIS) 5~65MHz (EuroDOCSIS) 5~85MHz (Optional)
Modulation	TDMA: QPSK,8QAM,16QAM,32QAM,64QAM S-CDMA: QPSK,8QAM,16QAM,32QAM,64QAM,128QAM
PHY Rate	Up to 108Mbps by 4 Channel Bonding
RF Output Level	TDMA (32/64 QAM): +17 ~ +57dBmV TDMA (8/16 QAM): +17 ~ +58dBmV TDMA (QPSK): +17 ~ +61dBmV S-CDMA: +17 ~ +56dBmV
RF Loop Through (SMB)
Frequency (Edge to Edge)	88 ~ 1002 MHz
Loop Through Gain	>6 dB
WiFi (2.4G 2×2 11n)
Standard		IEEE 802.11n
Chipset		MT7628NN
MEMORY		64MB SDRAM
Flash		16MB SPI Flash
PHY Rate		Max 300Mbps
Modulation Method		BPSK / QPSK / 16-QAM / 64-QAM
Frequency Band		2.4 ~ 2.4835 GHz ISM Band
Spread Spectrum		IEEE 802.11b: DSSS (Direct Sequence Spread Spectrum) IEEE 802.11g/n: OFDM (Orthogonal Frequency Division Multiplexing)
RF Output Power		ANT0/1: 2.4GHz >= 15dBm@11n; >= 16dBm@11g; < 20dBm@11b
AP / STA Firmware		Linux 2.6.36 SDK
Operation Mode		Green AP/STA
Receiver Sensitivity		ANT0/1: 11Mbps -86dBm@8%; 54Mbps -73dBm@10%; 130Mbps -69dBm@10%
Security		WEP,WPA, WPA2
Antenna		2xIpex connector
Networking
Network protocol	IP/TCP/UDP/ARP/ICMP/DHCP/TFTP/SNMP/HTTP/TR069/VPN (L2 and L3)
Routing	DNS / DHCP server / RIP I and II
Internet Sharing	NAT / NAPT / DHCP server / DNS
SNMP version	SNMP v1/v2/v3
DHCP server	Built-in DHCP server to distribute IP address to CPE by CM’s Ethernet port
DCHP client	CM automatically gets IP and DNS server address from MSO DHCP server
Mechanical
Dimensions (TBD)	133mm x 99mm x 20mm (Including Heatsink)
WPS Button	WPS Button
Environmental
Power Input	12V/1A
Power Consumption	12W (Max.)
Operating Temperature	0 to 40 ^oC
Operating Humidity	10~90% (Non Condensing)
Storage Temperature	-40 to 85 ^oC

Interface Pin Definition and Mechanical Characteristic

F Connector:

1 (1)

RF Loop Throughput: SMB, 75 OHM, Straight Angle, DIP

1 (7)

RJ45, w/Shielding, w/LED, w/o Transformer, Yellow, Right Angle, DIP

1 (5)

Signal Interface 1: Pin Header, 2×18, 2.0mm, K31, K32, Straight Angle, SMD

Table #1: Signal Interface 1
Pin1	RX1+	Pin19	GROUND
Pin2	RX1-	Pin20	USB_DP
Pin3	TX1+	Pin21	NC
Pin4	TX1-	Pin22	NC
Pin5	RX2+	Pin23	NC
Pin6	RX2-	Pin24	NC
Pin7	TX2+	Pin25	NC
Pin8	TX2-	Pin26	NC
Pin9	NC	Pin27	NC
Pin10	NC	Pin28	NC
Pin11	NC	Pin29	NC
Pin12	NC	Pin30	NC
Pin13	NC	Pin31	K
Pin14	GROUND	Pin32	K
Pin15	GROUND	Pin33	+12V
Pin16	USB_DM	Pin34	+12V
Pin17	GROUND	Pin35	GND
Pin18	USB_DM	Pin36	GND