China Wholesale Coaxial Cable For Modem Products – ECMM, DOCSIS 3.0, 1xGE, F/MCX/SMB, SP110IE – MoreLink

China Wholesale Coaxial Cable For Modem Products –  ECMM, DOCSIS 3.0, 1xGE, F/MCX/SMB, SP110IE – MoreLink

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We're committed to furnishing easy,time-saving and money-saving one-stop purchasing support of consumer for N9, Spectrum Analysis Software, Cable Internet, Your inquiry will be highly welcomed and a win-win prosperous development are what we are expecting.
China Wholesale Coaxial Cable For Modem Products – ECMM, DOCSIS 3.0, 1xGE, F/MCX/SMB, SP110IE – MoreLink Detail:

Product Detail

The MoreLink’s SP110IE is a DOCSIS 3.0 ECMM Module (Embedded Cable Modem Module) supporting up to 8 downstream and 4 upstream bonded channels to deliver a powerful high-speed Internet experience.

The SP110IE is temperature hardened for integration in other products that are required to operate in the outdoor or extreme temperature environment.

Base on Full Band Capture (FBC) function, SP110IE is not only a Cable Modem, but also can be used as a Spectrum Analyzer.

Heatsink is mandatory and application specific. Three PCB holes are provided around the CPU, so that a heatsinking bracket or similar device can be affixed to the PCB, to transfer the generated heat away from the CPU and towards the housing and environment.

This product specification covers DOCSIS® and EuroDOCSIS® 3.0 versions of the Embedded Cable Modem Module series of products. Throughput this document, it will be referred as SP110IE.

Product Features

➢ DOCSIS / EuroDOCSIS 3.0 compliant

➢ 8 downstream x 4 upstream bonded channels

➢ Temperature hardened

➢ Support Full Band Capture

➢ Selectable RF connectors: F, SMB, MCX

➢ SPI, UART, GPIO signals are accessible by Signal Interface

➢ One Gigabit Ethernet Port supporting auto-negotiation

➢ Standalone External Watchdog

➢ Temperature sensor on board

➢ Accurate RF power level (+/-1dB) at all temperature range

➢ Embedded Spectrum Analyzer

➢ DOCSIS MIBs, SCTE HMS MIBs supported

➢ Open system API and data structure for 3rd party application access

➢ Software upgrade by HFC network

Application

➢ Transponder, such as Power Supply, Fiber Node, UPS, CATV Power

➢ IP-Camera Video

➢ Digital Signage

➢ Wi-Fi Hotspot Traffic

➢ Emergency broadcast

➢ 4G LTE and 5G Small Cell

➢ DVB-C or Hybrid STB embedded CM

➢ Smart City Applications

Support HMS MIBs

1

SCTE 36(HMS028R6) SCTE-ROOT and scteHmsTree definition

2

SCTE 37(HMS072R5) scteHmsTree subgroups

3

SCTE 38-1(HMS026R12) propertyIdent objects

4

SCTE 38-2(HMS023R13) alarmsIdent objects

5

SCTE 38-3(HMS024R13) commonAdminGroup objects and the commonPhyAddress object

6

SCTE 38-4(HMS027R12) psIdent objects

7

SCTE 38-5(HMS025R13) fnIdent objects

8

SCTE 38-7(HMS050R5) transponderInterfaceBusIdent objects

9

SCTE 38-10(HMS115) RF Amplifier MIB objects

10

SCTE 25-1 Hybrid Fiber Coax Outside Plant Status Monitoring

Technical Parameters

Protocol Support

DOCSIS/EuroDOCSIS 1.1/2.0/3.0
SNMP v1/v2/v3
TR069

Connectivity

RF 75 OHM Female F Connector (Diplexer Split: 42/54; 65/88; 85/108)
Two SMB 75 OHM Connector (Downstream, Upstream  Separately)
Two MCX 75 OHM Connector (Downstream, Upstream  Separately)
RJ45 1x RJ45 Ethernet port 10/100/1000 Mbps
Signal Interface 2.0mm Box Header
2.0mm Pin Header (Option)
2.0mm Wafer Header (Option)
The signals including: SPI, DOCSIS LEDs, Reset, GPIO and UART.
Pin Definitions see Table #1

RF Downstream

Frequency (edge-to-edge) 88~1002 MHz (DOCSIS)
108~1002MHz (EuroDOCSIS)
Channel Bandwidth 6MHz (DOCSIS)
8MHz (EuroDOCSIS)
6/8MHz (Auto Detection, Hybrid Mode)
Modulation 64QAM, 256QAM
Data Rate Up to 400Mbps by 8 Channel bonding
Signal Level Docsis: -15 to +15dBmV
Euro Docsis: -17 to +13dBmV (64QAM); -13 to +17dBmV (256QAM)

RF Upstream

Frequency Range 5~42MHz (DOCSIS)
5~65MHz (EuroDOCSIS)
5~85MHz (Optional)
Modulation TDMA: QPSK,8QAM,16QAM,32QAM,64QAM
S-CDMA: QPSK,8QAM,16QAM,32QAM,64QAM,128QAM
Data Rate Up to 108Mbps by 4 Channel Bonding
RF Output Level TDMA (32/64 QAM): +17 ~ +57dBmV
TDMA (8/16 QAM):  +17 ~ +58dBmV
TDMA (QPSK):      +17 ~ +61dBmV
S-CDMA:           +17 ~ +56dBmV

Networking

Network protocol IP/TCP/UDP/ARP/ICMP/DHCP/TFTP/SNMP/HTTP/TR069/VPN (L2 and L3)
Routing DNS / DHCP server / RIP I and II
Internet Sharing NAT / NAPT / DHCP server / DNS
SNMP version SNMP v1/v2/v3
DHCP server Built-in DHCP server to distribute IP address to CPE by CM’s Ethernet port
DCHP client CM automatically gets IP and DNS server address from MSO DHCP server

Mechanical

Status LED x6 (PWR, DS, US, Online, LAN, RF Level)
Factory Reset Button x1 (SW401)
Dimensions (w/o Heatsink) 65mm (W) x 138mm (H) x 19mm (D) (F connector)
65mm (W) x 110mm (H) x 19mm (D) (SMB/MCX)

Environmental

Power Input DC Jack (6.4mm/2.0mm)
Wafer Header 2Pin (Option)
Support wide power input: +5VDC ~ +24VDC
Power Consumption 12W (Max.) 7W (TYP.)
Operating Temperature Commercial: 0 ~ +70 oC
Industrial: -40 ~ +85 oC
Operating Humidity 10~90% (Non Condensing)
Storage Temperature -40 ~ +85 oC

Spectrum Analyzer: Main Features

- Scan frequency range (5 – 1002MHz)

- RBW setting

- Marker (When Locked, Power Level/QAM/post/pre BER/Symbol Rate)

- Constellation

- Peak/Average

- Alert

- Unit (dBm/dBmV/dBuV)

- Nosie level <-50 dBmV for DS

- Noise level <-20 dBmV for US

1 (16)

Signal Interface: Pin Definition (J1410, J1413, J1414)

Port Pin Signal Description Signal Type Signal Level

1

SPI MOSI Digital Output 0 to 3.3VDC

2

SPI CLOCK Digital Output 0 to 3.3VDC

3

SPI MISO Digital Input 0 to 3.3VDC

4

DS LED (lit when low) Digital Output 0 to 3.3VDC

5

Ground Reference 0V

6

ONLINE LED (lit when low) Digital Output 0 to 3.3VDC

7

US LED (lit when low) Digital Output 0 to 3.3VDC

8

PWR LED (lit when low) Digital Output 0 to 3.3VDC

9

SPI Chip Select 1 Digital Output 0 to 3.3VDC

10

SPI Chip Select 2 Digital Output 0 to 3.3VDC

11

GPIO_01 Future use 0 to 3.3VDC

12

Ground Reference 0V

13

Ground Reference 0V

14

Serial port transmit enable Digital Output 0 to 3.3VDC

15

Reset (Active low) Digital Input 0 to “Open” or 3.3VDC

16

RF LEVEL Green LED (lit when low) Digital Output 0 to 3.3VDC

17

GPIO_02 Future use 0 to 3.3VDC

18

RF LEVEL Red LED (lit when low) Digital Output 0 to 3.3VDC

19

UART Transmit Digital Output 0 to 3.3VDC

20

UART Receive Digital Output 0 to 3.3VDC

J1410: Pin Header, 2×10, 2.0mm, Right Angle. 

1 (5)

J1413: Box Header, 2×10, 2.0mm, Straight Angle. 

1 (9)

J1414: Pin Header, 2×10, 2.0mm, Straight Angle. 

1 (10)

J1414: Pin Header, 2×10, 2.0mm, Straight Angle. 

1 (11)

J1414: Pin Header, 2×10, 2.0mm, Straight Angle. 

1 (12)

J1405, J1406: SMB, 75 OHM, DIP, Right Angle. Separate D/S and U/S RF Signal.

1 (13)

J1403, J1404: MCX, 75 OHM, DIP, Straight Angle. Separate D/S and U/S RF Signal.

1 (14)

F, Diplexer (Note: Not suggest to be used in New Design). Combine D/S and U/S RF Signal.

1 (15)

CN5: Wafer Header, 1x 2, 2.0mm, Right Angle. Populate at the bottom side of PCB.

Pin1 – VIN

Pin2  GND

1 (17)

CN6: DC JACK, OD=6.4mm/ID=2.0mm. Matching DC Plug OD=5.5mm/ID=2.1mm

1 (18)
2 (1)

PCBA Dimensions (Unit: mm) F – Diplexer

2 (2)

PCBA Dimensions (Unit: mm) SMB/MCX

2 (3)


Product detail pictures:

China Wholesale Coaxial Cable For Modem Products –  ECMM, DOCSIS 3.0, 1xGE, F/MCX/SMB, SP110IE – MoreLink detail pictures

China Wholesale Coaxial Cable For Modem Products –  ECMM, DOCSIS 3.0, 1xGE, F/MCX/SMB, SP110IE – MoreLink detail pictures

China Wholesale Coaxial Cable For Modem Products –  ECMM, DOCSIS 3.0, 1xGE, F/MCX/SMB, SP110IE – MoreLink detail pictures

China Wholesale Coaxial Cable For Modem Products –  ECMM, DOCSIS 3.0, 1xGE, F/MCX/SMB, SP110IE – MoreLink detail pictures

China Wholesale Coaxial Cable For Modem Products –  ECMM, DOCSIS 3.0, 1xGE, F/MCX/SMB, SP110IE – MoreLink detail pictures


Related Product Guide:

We've got a specialist, effectiveness staff to supply high quality service for our shopper. We always follow the tenet of customer-oriented, details-focused for China Wholesale Coaxial Cable For Modem Products – ECMM, DOCSIS 3.0, 1xGE, F/MCX/SMB, SP110IE – MoreLink, The product will supply to all over the world, such as: Sheffield, Pretoria, Hanover, The company attaches great importance to product quality and service quality, based on the business philosophy "good with people, genuine to whole world, your satisfaction is our pursuit". we design products, According to customer's sample and requirements, to meet the needs of the market and offer different customers with personalized service. Our company warmly welcomes friends at home and abroad to visit, to discuss cooperation and seek common development!
  • The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
    5 Stars By Clementine from Estonia - 2018.11.11 19:52
    The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!
    5 Stars By Lauren from Bulgaria - 2017.09.22 11:32

    Related Products