Continuous Monitor Factory – 1RU QAM Analyzer with Cloud, Power Level and MER for both DVB-C and DOCSIS, MKQ124 – MoreLink

Continuous Monitor Factory –  1RU QAM Analyzer with Cloud, Power Level and MER for both DVB-C and DOCSIS,  MKQ124  – MoreLink

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

With our leading technology at the same time as our spirit of innovation,mutual cooperation, benefits and advancement, we will build a prosperous future with each other with your esteemed firm for Tcp, Spectrum Analyzer App, Coaxial Cable For Modem, Warmly welcome to cooperate and develop with us! we are going to continue to provide product or service with high quality and competitive rate.
Continuous Monitor Factory – 1RU QAM Analyzer with Cloud, Power Level and MER for both DVB-C and DOCSIS, MKQ124 – MoreLink Detail:

Product Detail

MKQ124 is a powerful and use-friendly QAM Analyzer intended to monitor and report the health of the Digital Cable and HFC network.

It’s able to continuously log all measurements values in report files and to send SNMP traps in real-time if selected parameters’ values over defined thresholds. For troubleshooting a WEB GUI allows remote / local access to all monitored parameters at the physical RF layer and DVB-C / DOCSIS layers.

MKQ124 is a powerful and use-friendly QAM Analyzer intended to monitor and report the health of the Digital Cable and HFC network.

It’s able to continuously log all measurements values in report files and to send SNMP traps in real-time if selected parameters’ values over defined thresholds. For troubleshooting a WEB GUI allows remote / local access to all monitored parameters at the physical RF layer and DVB-C / DOCSIS layers.

As the number of Digital Cable TV and DOCSIS subscribers keeps increasing worldwide and Quality of Service has become a significant element to reduce subscribers churn, MKQ124 is the ideal tool to achieve cost-effective 24/7 monitoring of the quality delivered to all points of a Digital Cable network. The cable operator can deploy it at the headend / hub, along the last mile, or at the subscriber premise.

MKQ124 is a sub-system as rackmount to continuously monitor frequency/amplitude/constellation/BER responses for all QAM channels. By using these monitoring parameters, operator can be proactive in correcting the cable quality issue and also to locate the area where degradation is impacting service.

2 (2)
2 (3)

Benefits

➢ Remote and local monitoring of the health of your CATV network

➢ Real-time and Continuous QAM monitoring

➢ High Accuracy for wide range power and tilt: +/-1dB for Power, +/-1.5dB for MER

➢ Validation of HFC forward path and transmission RF quality

➢ Embedded Spectrum Analyzer from 5 MHz to 1 GHz

Characteristics

➢ DVB-C and DOCSIS full support

➢ ITU-J83 Annexes A, B, C support

➢ User defined alert parameter and threshold, support two channel profile: plan A / plan B

➢ 2x RF in, 4x RJ45 (2x WAN + 2x LAN) ports in 1 RU

➢ RF key parameters accurate measurements

➢ TCP / UCP / DHCP / HTTP / SNMP support

➢ Standalone unit

Monitor Parameters

➢ 64 QAM / 256 QAM / 4096 QAM (Option) / OFDM (Option)

➢ RF Power Level: -15 to + 50 dBmV

➢ MER: 20 to 50 dB

➢ Pre-BER and RS correctable count

➢ Post-BER and RS uncorrectable count

➢ Constellation

Applications

➢ Both DVB-C and DOCSIS Digital Cable network monitoring

➢ Multi-channel monitoring

➢ Real-time QAM Analysis

Interfaces

RF Female F Connector
RJ45 (4x RJ45 Ethernet port) 10/100/1000

Mbps

AC Power Socket 3Pin
RF Characteristics
Frequency Range (Edge-to-Edge) 88 – 1002

MHz

Channel Bandwidth (Auto Detection) 6/8

MHz

Modulation 16/32/64/128/256
4096 (Option) / OFDM (Option)

QAM

RF Input Power Level Range (Sensitivity) -15 to + 50

dBmV

Symbol Rate 5.056941 (QAM64)
5.360537 (QAM256)
6.952 (64-QAM and 256-QAM)
6.900, 6.875, 5.200

Msym/s

Input Impedance 75

OHM

Input Return Loss > 6

dB

Minimum Noise Level -55

dBmV

Channel Power Level Accuracy +/-1

dB

MER 20 to +50 (+/-1.5)

dB

BER Pre- RS BER and Post- RS BER

Spectrum Analyzer

Basic Spectrum Analyzer Settings

Preset / Hold / Run

Frequency

Span (Minimum: 6 MHz)

RBW (Minimum: 3.7 KHz)

Amplitude Offset

Amplitude Unit (dBm, dBmV, dBuV)

Measurement

Marker

 Average

Peak Hold

Constellation

Channel Power

Channel Demod

Pre-BER / Post-BER

FEC Lock / QAM Mode / Annex

Power Level / SNR / Symbol Rate

Number of Sample (Maximum) per Span

2048

Scan Speed @ Sample number = 2048

1 (TPY.)

Second

Obtain Data
Realtime Data By API

Telnet (CLI) / Web Socket / MIB

Software Features

Protocols TCP / UCP / DHCP / HTTP / SNMP
Channel Table > 80 RF Channels
Scan Time for the entire channel table Within 5 minutes for a typical table with 80 RF channels.
Supported Channel type DVB-C and DOCSIS
Monitored Parameters RF Level, QAM Constellation, SNR, FEC, BER, Spectrum Analyzer
WEB UI Easy to show the scan results in a web browser.
Easy to change monitored channels in table.
Spectrum for HFC plant.
Constellation for specific frequency.
MIB Private MIBs. Facilitate access to monitoring data for network management systems
Alarm Thresholds Signal Level / BER / SNR can be set via WEB UI or MIB, and alarm messages can be send via SNMP TRAP or displayed on the webpage
LOG Can store at least 3 days of monitoring logs and alarm logs with 15min scanning interval for 80 Channels configuration.
Customization Open protocol and can be easily integrated with OSS
Firmware Upgrade Support remote or local firmware upgrade
Physical
Dimensions 432mm (W) x 244mm (D) x 45mm (H) (Including F connector)
Format 1 RU (19”)
Weight 2250+/-10 g
Power Supply 100-240 VAC 50-60Hz
Power Consumption < 24W
Environment
Operating Temperature 0 to 45 oC
Operating Humidity 10 to 90 % (Non Condensing)
Storage Temperature -40 to 85 oC

WEB GUI Screenshots

Monitoring Parameters (Plan B)

1 (5)

Full Spectrum and Channel Parameters

(Lock Status; QAM Mode; Channel Power; MER; post BER; Symbol Rate; Spectrum Inverted)

1 (6)
1 (7)

Constellation

1 (1)

Cloud Management Platform

1 (8)


Product detail pictures:

Continuous Monitor Factory –  1RU QAM Analyzer with Cloud, Power Level and MER for both DVB-C and DOCSIS,  MKQ124  – MoreLink detail pictures


Related Product Guide:

Our enterprise since its inception, constantly regards product good quality as organization life, constantly improve production technology, strengthen merchandise high quality and continuously strengthen enterprise total good quality administration, in strict accordance with all the national standard ISO 9001:2000 for Continuous Monitor Factory – 1RU QAM Analyzer with Cloud, Power Level and MER for both DVB-C and DOCSIS, MKQ124 – MoreLink, The product will supply to all over the world, such as: United Kingdom, Czech republic, Sri Lanka, Our solutions have national accreditation standards for experienced, premium quality items, affordable value, was welcomed by people around the globe. Our goods will continue to increase in the order and look forward to cooperation with you, Really should any of those products be of interest to you, please letus know. We are going to be pleased to give you a quotation up on receipt of one's detailed specifications.
  • We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
    5 Stars By Melissa from Bandung - 2018.06.18 19:26
    This company has the idea of "better quality, lower processing costs, prices are more reasonable", so they have competitive product quality and price, that's the main reason we chose to cooperate.
    5 Stars By Jonathan from Honduras - 2018.12.11 14:13

    Related Products