Latest Smart Home Products Factories – Wi-Fi AP/STA module,fast roaming for industrial automation, SW221E – MoreLink

Latest Smart Home Products Factories –  Wi-Fi AP/STA module,fast roaming for industrial automation, SW221E – MoreLink

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our company aims to operating faithfully, serving to all of our customers , and working in new technology and new machine constantly for Cm Router Combo, Cable Modem Spectrum Analyzer, Network Signal Analyzer, We welcome new and old clients from all walks of lifestyle to speak to us for potential organization relationships and mutual success!
Latest Smart Home Products Factories – Wi-Fi AP/STA module,fast roaming for industrial automation, SW221E – MoreLink Detail:

The system block as below:

 

1

Features

♦ WiFi Solution: QCA6174A
♦ MT7620A, embedded MIPS24KEc (580 MHz) with 64 KB I-Cache and 32 KB D-Cache; 1x PCIe, 2x RGMII
♦ QCA6174A, 802.11 a/b/g/n/ac WiFi 2T2R Single Chip, provides the highest PHY rate up to 867 Mbps
♦ WiFi 2.4G and 5G are switchable (Change mode will be taken an effect after rebooting)
♦ WiFi Mode: it can be configured as STA (Default) and AP mode by SW

♦ Support Windows version: Windows XP, Explorer6 and above version of it
♦ Setting value can be backup/restore into/from file which is editable before restore to device
♦ Factory default settings are 5G 11n and STA mode
♦ Support Setup-wizard

♦ Support FW remote upgrade
♦ Memory: DDR2 64MB, SPI Flash 8MB

♦ GPHY: REALTEK RTL8211E, 10/100/1000M Ethernet Transceiver
♦ LAN: Gigabit Ethernet interface (RJ45) x1
♦ Chip Antenna: x2, On-board, SMD Type; Peak Gain: 3dBi (2.4GHz)/3.3dBi (5GHz), Dual band
♦ Power Input Range: 5 to 24 VDC
♦ Super Small Package

Technical Parameters

Connectivity I/O Port
1. RJ45 LAN Port10/100/1000 Base-T(X)RJ45, w/shielding, w/o transformer, w/o LEDs, Right Angle, DIP
2. Power Connector Connected to Power Adapter (Voltage 24V); PA Pin Header, 1×2, 2.0mm, Right Angle, DIP
3. DC JACK Connected to USB interface cable;DC Jack, DC 30V/0.5A, ID=1.6mm, OD=4.5mm, Right Angle, DIP
4. INIT Connector Pin definition and function, please refer to the followingWafer Header, 1×2, 1.5mm, Straight Angle, DIP
5. DIP Switch Pin definition and function, please refer to the followingDIP Switch, 2-Position, Red, Right Angle, DIP
6. SMD LED 0603 WLAN LED: GreenLAN LED: Orange for GE (Giga Ethernet); Green for FE (Fast Ethernet)PWR LED: GreenDHCP Error LED: Red
Wireless (2.4G, 5G switchable)
Standard 802.11 b/g/n, 2T2R802.11 a/n/ac, 2T2R
Freq. Mode Switchable (Change mode will be taken an effect after rebooting)
Channel KR standard, it should support CN, US WiFi channel by FW update later
Antenna Chip-antenna x 2 MIMO
Roaming 10ms fast roaming (only support between same frequency)
Mode STA, AP switchableDefault is STA mode
WiFi 2.4G
Channel, 13Ch. Ch. 1~13, 2402~2482MHz
Standard 802.11 b/g/n
Performance 2T2R, PHY rate up to 300 Mbps
TX Power >15dBm @HT20 MCS7 @ Antenna Port
RX sensitivity -68dBm@20MHz, MCS7; -66dBm@40MHz, MCS7
Security WEP WPA WPA2
WiFi 5G
Channel, 19Ch. Ch. 36,40,44,48                  5170~5250MHzCh. 52,56,60,64                  5250~5330MHzCh. 100,104,108,112,116,120,124  5490~5630MHzCh. 149,153,157,161              5735~5815MHz
Standard 802.11 a/n/ac
Performance 2T2R, PHY rate up to 867 Mbps
TX Power >14dBm @HT80 MCS9 @ Antenna Port
RX sensitivity -74dBm@20MHz, MCS7; -71dBm@40MHz, MCS7; -61dBm@80MHz, MCS9
Security WEP WPA WPA2
Mechanical
Dimensions  89.2mm (W) x 60mm (L) x 21mm (H)
Weight TBD
Environmental
Power Input 24V/0.25A
Power Consumption 6W (Max.)
Operating Temperature 0 to 40 °C
Operating Humidity 10~90% (Non Condensing)
Storage Temperature -40 to 85 °C
MTBF TBD, which is based on the materials used by design and DUT, operates condition.

About the WiFi Speed

The link speed shown for the transmission rate in this produce specification, and elsewhere is the theoretical maximum value based on the wireless LAN standard and does not represent the actual data transfer rate.


Product detail pictures:

Latest Smart Home Products Factories –  Wi-Fi AP/STA module,fast roaming for industrial automation, SW221E – MoreLink detail pictures


Related Product Guide:

We thinks what customers think, the urgency of urgency to act in the interests of a customer position of principle, allowing for better quality, lower processing costs, prices are more reasonable, won the new and old customers the support and affirmation for Latest Smart Home Products Factories – Wi-Fi AP/STA module,fast roaming for industrial automation, SW221E – MoreLink, The product will supply to all over the world, such as: Southampton, Porto, Luxemburg, we're now looking forward to even greater cooperation with overseas customers based on mutual benefits. We are going to work wholeheartedly to improve our products and services. We also promise to work jointly with business partners to elevate our cooperation to a higher level and share success together. Warmly welcome you to visit our factory sincerely.
  • Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.
    5 Stars By Janice from Rome - 2017.11.01 17:04
    In general, we are satisfied with all aspects, cheap, high-quality, fast delivery and good procuct style, we will have follow-up cooperation!
    5 Stars By Lynn from Bahrain - 2018.04.25 16:46

    Related Products