MKH5000
Short Description:
5G extended base station is a miniaturized, low-power and distributed base station. It is a 5G indoor coverage base station equipment based on the transmission and distribution of wireless signals. It is mainly used in office buildings, shopping malls, campuses, hospitals, hotels, parking lots and other indoor scenes, to achieve accurate and deep coverage of indoor 5G signal and capacity.
Product Detail
Product Tags
Introduction
5G extended base station is a miniaturized, low-power and distributed base station. It is a 5G indoor coverage base station equipment based on the transmission and distribution of wireless signals. It is mainly used in office buildings, shopping malls, campuses, hospitals, hotels, parking lots and other indoor scenes, to achieve accurate and deep coverage of indoor 5G signal and capacity.
The 5G extended base station system is composed of 5G host unit (AU, Antenna Unit), expansion unit (HUB) and remote unit (pRU). The host unit and the expansion unit are connected through the optical fiber, and the expansion unit and the remote unit are connected through the photoelectric composite cable. The system networking architecture is shown in Figure 1-1 5G extended base station system architecture diagram.
Figure 1-1 5G extended base station system architecture diagram
Specifications
The MKH5000 product appearance, as shown in Figure 2-1.
Figure 2-1 Appearance of the MKH5000 product
Key technical specifications of the MKH5000 are shown in Table 2-1.
Table 2-1 Specifications
|
No. |
Technical Indicator Category |
Performance and indicators |
|
1 |
Networking Capability |
It supports access to 8 remote units, and supports the expansion of the next-level expansion units at the same time, and supports a maximum of 2-level expansion units for cascading |
|
2 |
Support Uplink Signal Aggregation |
Supports the aggregation of the upstream IQ data of each connected remote unit, and also supports the aggregation of the IQ data of the cascaded next-level expansion units |
|
3 |
Support Downlink Signal Broadcast |
Broadcast downstream signals to connected remote units and cascaded next-level expansion units |
|
4 |
Interface |
CPRI/eCPRI@10GE optical port |
|
5 |
Remote power supply capability |
-48V DC power supply to the eight remote units is carried out through the photoelectric composite cable, and each RRU power supply can be controlled independently |
|
6 |
Cooling Method |
Air cooling |
|
7 |
Installation Method |
Rack or wall mount |
|
8 |
Dimensions |
442mm*310mm*43.6mm |
|
9 |
Weight |
6kg |
|
10 |
Power Supply |
AC 100V~240V |
|
11 |
Power Consumption |
55W |
|
12 |
Protection Grade |
The protection grade of the case is IP20, which is suitable for the indoor working environment. |
|
13 |
Operating Temperature |
-5℃~+55℃ |
|
14 |
Working Relative Humidity |
15%~85% (no condensation) |
|
15 |
LED Indicator |
Run, Alarm, PWR, RESET, OPT |
