Outdoor Modem Gateway, DOCSIS 3.1, 4xGE, PoE, Digital Attenuator, OMG310

Short Description:

The MoreLink’s OMG310 is a DOCSIS 3.1 ECMM Module (Embedded Cable Modem Module) supporting 2×2 OFDM and 32×8 SC-QAM to deliver a powerful high-speed Internet experience. Temperature hardened design which is suitable for industrial applications.

The OMG310 is the perfect choice for cable operators who want to offer high-speed and economic broadband access to their customer base. It delivers speeds up to 4Gbps based on 4 Giga Ethernet ports over its DOCSIS interface. The OMG310 allows MSOs to offer their customers various broadband applications such as telecommuting, HD, and UHD video on demand over IP connectivity to a small oce/home oce (SOHO), high-speed residential Internet access, interactive multimedia services, etc.

Send email to us

Product Detail

Product Tags

Product Detail

The MoreLink’s OMG310 is a DOCSIS 3.1 ECMM Module (Embedded Cable Modem Module) supporting 2x2 OFDM and 32x8 SC-QAM to deliver a powerful high-speed Internet experience. Temperature hardened design which is suitable for industrial applications.

The OMG310 is an intelligent device that enhances its basic data transmission features with IPv6 support, which makes it especially suitable for the transmission of data based on this protocol.

Highlights

Broadcoms BCM3390 Single-Chip SoC

DOCSIS 3.1, 2 downstream x 2 upstream OFDM

DOCSIS 3.0, 32 downstream x 8 upstream SC-QAM

Full Band Capture up to 1.2 GHz

Supports IPv4 and IPv6

Four ports Gigabit Ethernets with PoE+

Temperature hardened, DOCSIS-Based high-performance internet connection. The OMG310 is the perfect choice for cable operators who want to deliver high-speed broadband for specialized data applications, such as small cell backhaul, IP-Camera video surveillance, WiFi hotspot traffic and Digital Signage. Hardened against the elements for outdoor use, it delivers speeds of up to 4 Gbps.

Product Features

➢ DOCSIS / EuroDOCSIS 3.1 compliant

➢ 2x192MHz OFDM downstream reception capability

-4096 QAM support

➢ 32x SC-QAM (Single-Carries QAM) channel downstream reception capability

-1024 QAM support

-16 of 32 channels capable of enhanced de-interleaving for video support

➢ 2x96 MHz OFDMA upstream transmission capability

-256 QAM support

-S-CDMA and A/TDMA support

➢ FBC (Full Band Capture) Front End

-1.2 GHz Bandwidth

-Configurable to receive and channel in the downstream spectrum

-Supports fast channel change

-Real-time, diagnostic including spectrum analyzer functionality

➢ Digital Attenuators for Downstream and Upstream separately

➢ Standalone external watchdog design for high reliability

➢ Four Gigabit Ethernet Ports supporting IEEE 802.3at PoE

➢ Remote PoE Mode A/B switchable

➢ Tamper sensor

➢ Voltage, current petameters measurements

➢ Well-defined LEDs clearly display device and network status

➢ Software upgrade by HFC network

➢ SNMP V1/V2/V3

➢ Support baseline privacy encryption (BPI/BPI+)

Application

➢ IP Camera Video Surveillance

➢ Small Cell Backhaul

➢ Digital Signage

➢ Wi-Fi Hotspot Traffic

➢ Emergency broadcast

➢ Smart Cities

➢ Others which require business over DOCSIS

Technical Parameters

Basics
DOCSIS Standard	3.1
RF Interface	Female F Type, 75 OHM
Ethernet Interface	4-Port RJ45
Power Input	Cable powered 40 to120 AC 50 / 60Hz Sin or Quasi wave 90~264VAC
Operating Parameters Monitor	Power Consumption of System; Tamper; Temperature; RF
Operating Temperature	-40 ~ +60	°C
Surge Protection (F connector) Ring Wave Combination Wave	IEEE C62.41-1991 , cat A3 6KV 200A IEEE C62.41-1991 , cat B3 6KV 3KA
Dimensional Size (L x W H)	28.5 x 20.5 x 12	cm

Downstream
Frequency Range(edge to edge)	108-1218 258-1218	MHz
Input Impedance	75	Ω
Input Return Loss (across freq. range)	≥ 6	dB
SC-QAM channels
Number of Channels	32	max
Level Range (one channel)	North Am (64 QAM and 256 QAM): -15 to +15
	EURO (64 QAM): -17 to +13	dBmV
	EURO (256 QAM): -13 to +17
Modulation Type	64 QAM and 256 QAM
Symbol Rate (nominal)	North Am (64 QAM): 5.056941	Msym/s
	North Am (256 QAM): 5.360537
	EURO (64 QAM and 256 QAM): 6.952
Bandwidth	North Am (64 QAM/256QAM with α=0.18/0.12): 6	MHz
Bandwidth	EURO (64 QAM/256QAM with α=0.15): 8
OFDM channels
Signal Type	OFDM
Maximum OFDM Channel Bandwidth	192	MHz
Number of OFDM channels	2
Modulation Type	QPSK, 16-QAM, 64-QAM,128-QAM, 256-QAM, 512-QAM,
Modulation Type	1024-QAM, 2048-QAM, 4096-QAM

Upstream
Frequency Range (edge to edge)	5-85 5-204	MHz
Output Impedance	75	Ω
Maximum Transmit Level	+65	dBmV
Output Return Loss	≥ 6	dB
SC-QAM channels
Signal Type	TDMA, S-CDMA
Number of Channels	8	max
Modulation Type	QPSK, 8 QAM, 16 QAM, 32 QAM, 64 QAM, and 128 QAM
Minimum Transmit Level	P_min = +17 at ≤1280KHz symbol rate	dBmV
	2560KHz symbol rate
	5120KHz symbol rate
OFDMA channels
Signal Type	OFDMA
Maximum OFDMA Channel Bandwidth	96	MHz
Minimum OFDMA Occupied Bandwidth	6.4 (for 25 KHz subcarrier spacing)	MHz
Minimum OFDMA Occupied Bandwidth	10 (for 50 KHz subcarrier spacing)
Number of Independently configurableOFDMA channels	2
Number of Independently configurableOFDMA channels	2
Subcarrier Channel Spacing	25, 50	KHz
Modulation Type	BPSK, QPSK, 8-QAM, 16-QAM, 32-QAM, 64-QAM,128-QAM,
Modulation Type	256-QAM, 512-QAM, 1024-QAM, 2048-QAM, 4096-QAM

POE+
POE Ports	2/4 Configurable
Standard	IEEE 802.3af and IEEE 802.3at
Mode	Support Mode A and Mode B, and configurable
Mode A	Twisted-pair Ethernet connection allows power to be transmitted on the data conductors. (Pins 1, 2, 3, and 6).
Mode B	10BASE-T and 100BASE-TX only requires two pairs out of four pairs for data transmissions, therefore power transmitted on unused pairs.(Pins 4, 5, 7, and 8).
POE Default	Semi-Auto (Default Factory Setting)
Ethernet Port Pin
POE Output Capacity	PSE Side: 30W (Max.) for 2 ports + 15.4W (Max.) for 2 ports, ConfigurablePD Side: 25.45W (Max.) for 2 ports + 12.95W (Max.) for 2 ports
POE Output Voltage	+54V
Maximum Current	600mA per port
Ethernet Cable	CAT-5E or Better